Panel For Example Panel For Example Panel For Example
  • 1 Online Quote
  • 2 Upload Gerber File
  • 3 Payment
  • 4 Fabrication
  • 5 Shipment
  • 6 Confirm and Review
Details
  • Quantity
  • Total Area
  • Groove
  • Material Type
  • Dimensions
  • Order Type
  • X-out Panel
  • Panel Format
  • Edge Rail
  • Edge-Rail Width
  • Route Process
  • Layers
  • Thickness
  • Different Design
  • Finished Copper Thickness(outer)
  • Inner Copper
  • Solder Mask Color
  • Silkscreen Color
  • Min Spacing
  • Min Hole Size
  • Solder Mask
  • Pre-treatment
  • Surface Finish
  • Immersion Gold Thickness
  • Test Method
  • Thermal Conductivity
  • Withstand Voltage
  • Molding Technique
  • Impedance
  • Impedance Control Report
  • Castellated holes
  • Project File Confirm
  • Test Report
  • Solder Mask
Details of Special Parameters

Upload the Gerber or PCB file, the system will automatically analyze and fill in the identified parameters.
Please don't upload Gerber and PCB files in the same zip file.

Accept zip, rar format, less than 10MB All uploads are secure and confidential

Analysis Failed

We are sorry the analysis failed. Please try to fill in the paramaters manaully.
And you can upload your file after adding your order to cart.

Some parameters were extracted from your files and the order form has been updated. Please double-check these before adding them to the cart. If they are not correct, please select the correct option.
0%

1. While you wait, we recommand you to fill in the quantity and other special requirements first.

2. Frozen during the analysis? Stop Analysis first and fill in the parameters manually, then upload the file after adding to cart.

Material Type
Layers
Dimensions
Dimension is required
inch↔mm
Board Type
Different Design
Panel Format
Edge Rail
Edge Rail Width
mm
*min 4mm
Route Process
Routing width
X-out in Panel
ok
* Panelization Detail

Image for panelized board ↓ (for reference only)Scaling:/1

0.00 mm

0.00
mm

Quantity
pcs
Quantity is required
Single pieces quantity: Total Area:
Quality Classification
  • Alternate Text
PCB Specifications
Thickness
Solder Mask Side
By default, our one-layer boards have solder mask on one side, aligned with the traces, and no copper inside the holes. For special requirements, contact your sales representative.
Solder Mask
Silkscreen
Surface Finish
ENIG Thickness
Outer Copper
Inner Copper
Impedance
Impedance Control Report
Min Spacing
Min Hole Size
Via Process
For Gerber file,this choice will not affect anything.PCB will be made according to the design of the files.
Thermal Conductivity
Withstand Voltage
Withstand Voltage Description
High-voltage Insulation Test
Castellated holes
Project File Confirm
Advanced Options
Special Technique
    *Final price will be adjusted after the audit
    Test Method
    Test Report

    Test Report Type
      PCB Remark
      PCB Assembly Quote
      BOM Parts Options
      • Components Supplied by ALLPCB
      • Components Supplied by Customer
      • Components Supplied by Both Parties
      • Board Quantity
        PCS AI Panel
      • SMD Solder Joints
        Points
      • DIP Solder Joints
        Points
      • Assembly Side
      • Number of Unique Parts
        PCS
      • ≥48pins QFN Quantity
        PCS E.g BGA/ QFP/ QFN
      • Application Area
      Do you accept alternatives/substitutes if some parts are not available?
      Contains temperature and humidity sensitive components?
      Assembly Remark
      Quote Now
      PCB Price:
      • Raw Material
      • TG Value
      • Build Time
      • Price/pcs
      • PCB Cost
      PCBA Price:
      • Build Time
      • Unit Price
      • Quantity
      • PCBA Cost
      Shipping Cost:

      You can select your shipping option on order confirmation page.

      PCB Cost:
      --
      Shipping:
      --
      Total:
      --
      Add to Cart
      Material Selecting
      Brand/Type
      Other Specification
      TG Value
      Unfold
      Flexural Strength
      Thermal Stress
      Surface Resistivity
      Arc Resistance
      Moisture Absorption

      Related Results2

      Laminate pre-treatment PCB Cost Total (freight included) Price/pcs Lead Time
      油墨
      TG值
      是否阻燃
      表面电阻(MΩ)

      Order has been saved to Cart

      Go to Cart

      Failed to Add to Shopping Cart

      If you enter in units of inches and press the [Convert] button, it will be converted into units of millimeters in the quotation form.

      inch        inch

      用户拼版示意图 ↓ (仅供参考)

      缩放比例:/1

      0.00 cm

      0.00
      cm

      系统建议拼版示意图 ↓ (仅供参考)

      缩放比例:/1

      0.00 cm

      0.00
      cm

      根据拼版规则:
      建议高:0.00cm X 1,宽:0.00cm X 1方式拼版,
      拼版尺寸为:cm X cm,
      若需两边Edge Rail,建议加在长边

      Submit
      Submit

      Calculating the price...